Description
The power supply is factory preset at the customer specified output voltage.
Installation
The power supply should be installed in a well ventilated area and not enclosed where excessive heat build up can occur. Do not install or mount above any hot air discharge/air-conditioner/radiator or similar equipment. Mounting outside or in a wet/damp environment is also not recommended. Keep fan intake/output vents well clear of any material likely to block them.
Batteries
The above power supplies are not suitable for charging the battery.
Specifications
| Inrush Current | Cold Start, 15A/115V, 30A/230V |
|---|---|
| Line Regulation (Full load) | < ±0.5% |
| Output Over Voltage Protection | 110~150% |
| Output Over Load Protection | 110~150% |
| Over Temperature Protection | IC, Tj:135ºC, Power Shutdown |
| Withstand Voltage | I/P-O/P: 3.0KVAC/1min |
| Rise, Hold Up Time | 50ms, 20ms @ Full Load (Tipical) |
| Connection | 2P/2.54mm, 2P/3.96mm Pitch |
