Description
Details
The PSR12-5 output voltage is preset at the factory to the user’s requirements, this unit can be set to 13.8V for battery charging.
Installation
The power supply should be installed in a well ventilated area and not enclosed where excessive heat build up can occur. Do not install or mount above any hot air discharge/air-conditioner/radiator or similar equipment. Mounting outside or in a wet/damp environment is also not permissible.
Connections
Mains input is via a 3-pin plug and flex; output terminals for + and – connections are provided outside the case.
Specifications
| Output Ripple Voltage @ Full Load | < 0.1% |
|---|---|
| Load Regulation (Zero to Full Load) | < 1.0% |
| Line Regulation (220-240V) @ Full load | < 0.2% |
| Electronic Circuit Current Limit | Approx 8A DC |
| Input/Output Fuse | Not supplied |
| Thermal Protection | Internal protection circuitry on board |
