Description
The power supply is factory preset at the customer specified output voltage between 11 and 14.5V DC (usually 13.8V DC).
Mains input is via a 3-pin plug and flex; output studs for + and – connections are provided outside the case. A 12V female cigarette output socket is also supplied on the front panel.
Electronic limit can be disabled for large peak loads > 10A (e.g radio transmitters, motors…etc).
Installation
The power supply should be installed in a well ventilated area and not enclosed where excessive heat build up can occur. Do not install or mount above any hot air discharge/air-conditioner/radiator or similar equipment. Mounting outside or in a wet/damp environment is also not permissible.
Batteries
Sealed and open lead acid batteries can be charged. Please specify nominal output float voltage and size of battery when ordering.
Specifications
| Output Ripple Voltage @ Full Load | < 0.1% |
|---|---|
| Load Regulation (Zero to Full Load) | < 2.0% |
| Line Regulation (220-240V) @ Full load | < 0.1% |
| Electronic Circuit Current Limit | 5.1A DC (adjustable to 8A max for peak loads at 6 – 14 V DC) |
| Input Fuse | 2A Slow Blow 250V AC internally accessible |
| Thermal Protection | Internal protection circuitry on board |
| Voltage limit indication | Green LED |
| Current limit Indication | Red LED |